Languages:  English  
Currencies:  

Product 4/4

Previous
Return to the Product List
Next

RM Italy LA 250V Plus VHF 2 meter Linear Amplifier with Fans

$592.00

The New RM Italy LA 250 VHF 2 meter Amplifier just passed the FCC lab test, pending for FCC Approval

Review of LA 250 on eham


The LA-250 is a 200W 140-150MHz amplifier, at 1 to 20W input (13.6V 30A). It uses 4 Mitsubishi RD70 Mosfets mounted on a copper heat spreader (200x60x3mm).

It is available in two versions one with and one without top mounted fans. There is an external PTT input but it can be used also without due to the built-in HF-VOX. The front panel features an LCD display which shows input power, output power, heat sink temp and output VSWR. There is the ability to change the intensity of the backlight.

The CPU keeps an eye on input power, temperature and VSWR and will if necessary disable the amplifier from transmitting if there is fault. Any errors will also be recorded and will be available for later recall for diagnostic purposes by either the manufacturer or his distributors.

Weight is approximately 4kg. Dimensions are approximately 240x420x70mm for the non fan version and an extra 10mm of height, 80mm, for the fan version.

  • VHF 140—150 MHz Linear Amplifier
  • Operation Frequency: 140—150 MHz (2m Amateur VHF Band)
  • Modulation Types: SSB,CW,AM, FM, data etc (All narrowband modes)
  • Transistor: 4x Mitsubishi RD70HVF1
  • Power Supply: 13VDC+/- 1V 40A
  • Input Fuse (Internal): 3x10A (5x20mm Fast)
  • Input RF Power: 1-15W ; 20W max (All modes)
  • Output RF Power (Nominal): 30 – 210W ; 230W max AM/FM/CW
  • 230W max. AM/FM/CW/SSB Average Power
  • Maximum bypass power (Amplifier off): 50W
  • Input VSWR: 1.1—1.5:1 Output VSWR Maximum: 2.8:1
  • Protection: Reverse Polarity, High Temperature, Load VSWR and Excessive I/P power

    • Add to Cart:

    • Model: LA250vplus
    • Manufactured by: RM Italy


    This product was added to our catalog on Thursday 17 July, 2014.